This Heavy Duty Extractor Pin Set is a direct replacement for the factory extractor roll pin in S&W M&P and M2.0 pistols. If you have lost, bent, or damaged the original pin during routine extractor removal for cleaning or spring replacement, this set provides a ready spare. S&W specifies replacing this pin each time it is removed — this kit ensures you have the correct component on hand without hunting for a specialty fastener. The pins are manufactured to factory dimensions and material specifications; there is nothing proprietary about this part. It simply restores your extractor assembly to functional condition.
Compatibility
- S&W M&P 9mm (all generations, including M2.0)
- S&W M&P .40 S&W (all generations, including M2.0)
- S&W M&P .45 ACP (all generations, including M2.0)
- S&W M&P Shield (9mm, .40, .45)
- S&W M&P Shield M2.0 (9mm, .40)
- S&W M&P M2.0 Compact
- S&W M&P M2.0 Full Size
- S&W M&P M2.0 Subcompact
- S&W M&P 2.0 Performance Center models
- S&W M&P 9L / Pro Series
- S&W M&P 9 C.O.R.E.
- S&W M&P 9 M2.0 C.O.R.E.
Key Features
- Finished to factory roll pin dimensions – no fitting required
- Sold as a set of two pins (one primary, one spare)
- Direct replacement for OEM part – no modification to extractor or slide
- Material meets or exceeds factory hardness specs
- Intended for maintenance/cleaning applications where the original pin is removed
Install Difficulty: 2/5
Requires roll pin punch (1/16” or 1.5mm), small hammer, and non-marring block or vise. No gunsmithing experience needed. Remove old pin from extractor channel, align new pin, and drive through until flush. Do not reuse the old pin – discard after removal.
FAQ
Do I need to replace the extractor pin every time I remove it?
S&W factory maintenance protocols recommend a new pin after each removal. Roll pins are designed for single-use installation; reusing them can lead to loosening or failure under recoil. This set gives you a fresh pin for each cleaning cycle.
Will this pin work with aftermarket extractors?
Yes, provided the aftermarket extractor uses the same OEM roll pin channel diameter and location. Most drop-in extractors for M&P platforms are dimensionally identical to factory parts. Verify fit with your specific extractor before installation.
Is this pin stronger than the factory pin?
No. This pin is manufactured to the same material and hardness specifications as the OEM part. It is not a “heavy duty” upgrade in terms of material strength – the description refers to its function as a durable replacement for routine maintenance. If you need a stronger pin for competition or high-round-count use, consider a solid steel or titanium option.
Shipping: Orders over $75 ship free within the continental US. International shipping available – see checkout for rates.
Warranty: This component carries a limited lifetime warranty against manufacturing defects. Does not cover damage from improper installation, reuse, or modification.
Reviews
There are no reviews yet.