Performance Connector for Glock®

This Performance Connector is a drop-in replacement part designed to reduce trigger pull weight by approximately 1 lb. in compatible Glock® model pistols. It addresses the common issue of a heavy, gritty factory trigger break by altering the sear-to-connector engagement angle, producing a cleaner, lighter pull without modifying the striker block, trigger housing, or sear engagement surfaces. Factory safety values—including the drop safety and trigger-over-travel stop—remain unchanged. No fitting, filing, or polishing is required.

Compatibility

• Glock® 17, 17L, 19, 19X, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 30S, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 43X, 44, 45, 47, 48
• Glock® 17 Gen5, 19 Gen5, 19X, 26 Gen5, 34 Gen5, 45, 47
• Glock® 42, 43, 43X, 48 (single-stack models)
• Not compatible with Glock® 42, 43, 43X, 48 when using a factory minus connector or aftermarket trigger bars that alter the connector interface geometry.

Key Features

• Pull weight reduction: Approximately 1 lb. reduction from factory pull weight (baseline 5.5–6.5 lb. down to 4.5–5.5 lb., depending on trigger bar and striker assembly condition).
• Reset: Factory reset distance is retained; no change to trigger travel or over-travel.
• Drop-in installation: No fitting, polishing, or armorer-level disassembly required. Installs in under 5 minutes.
• Material: Precision-stamped steel with a corrosion-resistant finish.
• Safety: Maintains factory drop-safety performance; striker block function is unaffected.

Install Difficulty

1 out of 5 — Requires only a Glock® disassembly tool (or a punch) and a small flathead screwdriver. No trigger housing removal needed. Instructions included.

FAQ

Will this work with a Gen5 Glock®?

Yes. This connector is compatible with Gen5 models (17, 19, 26, 34, 45, 47) and the 19X. Ensure the trigger bar is the factory Gen5 bar; aftermarket bars may require a different connector angle.

Does this affect the trigger safety or drop safety?

No. The connector does not alter the striker block plunger, trigger safety tab, or sear engagement depth. Factory drop-safety performance is maintained.

Will this reduce trigger pull weight on a single-stack Glock® (42/43/43X/48)?

Yes. The reduction is approximately 1 lb. on single-stack models as well. Note that the factory minus connector is already installed in some single-stack models; if so, the reduction may be less than 1 lb.

Shipping: Ships same business day if ordered by 2 PM ET. Free shipping on orders over $75.
Warranty: This component is covered by a limited lifetime warranty against manufacturing defects. No modifications to the connector or pistol are required for warranty coverage.