Basic Forward Set Trigger Kit for Polymer Frame M&P M2.0 Pistols

This Basic Forward Set Trigger Kit provides a drop-in replacement trigger and sear actuator for polymer-frame Smith & Wesson M&P M2.0 pistols. It addresses two specific factory trigger issues: excessive overall trigger travel and a long, mushy reset. By replacing the factory trigger shoe and sear lever with a solid aluminum trigger and a Forward Set Sear Actuator, total trigger travel is reduced by approximately 35%. This kit does not reduce pre-travel friction, smooth the pull, or include springs to adjust pull weight—those require the Ultimate Striker Block or the full Forward Set Trigger Kit. Both components in this kit must be installed together; the pistol will not function if only one is used.

Compatibility

• Smith & Wesson M&P M2.0 (full-size, Compact, 5-inch, and C.O.R.E. models)
• Polymer-frame M2.0 pistols only—not compatible with Shield, Shield Plus, or metal-frame M2.0 models
• Will not fit original M&P 1.0 pistols without additional adapter parts

Key Features

• Solid-body aluminum trigger with center-mounted pivoting safety—replaces factory polymer trigger shoe
• Forward Set Sear Actuator relocates the striker release point forward, reducing overall trigger travel by ~35%
• Integrated over-travel stop on the trigger controls the stopping point when used with the included sear actuator
• Shortened reset distance compared to factory sear lever
• Trigger pull weight remains factory-spec; no change in pull weight from stock
• Both components must be installed together for proper function

Install Difficulty

Difficulty: 3 out of 5. Requires basic armorer’s tools (punch set, hammer, small screwdriver, and slave pin for trigger assembly). Recommended for shooters with previous M&P trigger work experience. Factory sear housing block must be removed and disassembled. Allow 30–45 minutes for first-time installation. A trigger gauge is recommended to verify pull weight after install.

FAQ

Will this kit reduce the trigger pull weight?

No. Based on factory testing, the trigger pull weight remains approximately the same as the factory M2.0 trigger. This kit does not include replacement springs to adjust pull weight. For adjustable pull weight and a smoother pull, use the complete Forward Set Trigger Kit or add the Special Sear Kit for Basic Kits (available separately).

What is the reset distance with this trigger?

The reset is shortened compared to the factory sear lever due to the Forward Set Sear Actuator’s geometry and the reduced over-travel stop. Exact reset distance varies by frame and slide tolerances, but users typically report a 30–40% reduction in reset length.

Can I install just the trigger or just the sear actuator?

No. Both components must be installed together. The trigger’s over-travel stop is calibrated specifically for the Forward Set Sear Actuator. Using only one of the two parts will result in a non-functional pistol—the sear may not release, or the trigger may not reset.

Shipping & Warranty

Free shipping on orders over $75. This kit includes a limited lifetime warranty against manufacturer defects. Warranty does not cover damage from improper installation, modification, or use of non-compatible parts. Return requests must include proof of purchase and be submitted within 30 days of delivery.